Guide

What Is Bar and Chain Oil?

Updated on · By the Yard Volt Lab team

Bar and chain oil is a sticky lubricant that coats a chainsaw's moving chain and guide bar to reduce friction, wear, and heat. Most chainsaws feed it from a separate oil tank while the chain runs.

On this page (7 sections)
  1. What is bar and chain oil used for?
  2. Why does a chainsaw need a separate oil supply?
  3. Is bar and chain oil different from motor oil?
  4. What are examples of bar and chain oil?
  5. Can four-cycle engine oil lubricate a chainsaw chain?
  6. How do you use and store bar oil?
  7. What is bar and chain oil, and when should you refill it?

Bar and chain oil is a tacky lubricant for the chainsaw's moving chain and guide bar. It reduces friction and wear where the chain slides around the bar, and a separate oil supply feeds the cutting assembly as the chain moves.

It isn't the same job as engine oil. A chainsaw's engine oil, when required by its design, serves the engine; bar oil serves the exposed chain and bar.

What is bar and chain oil used for?

Bar and chain oil coats the chain and guide bar to limit friction, wear, and heat during cutting. The chain moves rapidly around the bar, so the lubricant needs to cling to the parts instead of quickly flying away.

That staying power is called tackiness. Oregon says its bar oil is formulated for extra tack and to reduce oil throw off, while its high film strength helps prevent wear or scuffing and protects metal parts against corrosion and rust.

The bar oil also helps resist buildup of resin, sap, and gum on the chain. It doesn't sharpen a dull chain or replace safe cutting technique, chain tension checks, or other maintenance in the saw's manual.

Why does a chainsaw need a separate oil supply?

Most chainsaws use a separate reservoir to supply bar oil to the chain and guide bar. The oil is consumed at the cutting assembly, so it isn't mixed into the engine's crankcase like four-cycle engine oil.

On many saws, an oil pump moves lubricant from the reservoir toward the bar while the chain runs. The design and adjustment vary, so use your saw's manual to find its oil tank, refill steps, and checks for oil flow.

Don't confuse this reservoir with a fuel tank or an engine-oil fill point. If you also use a cordless mower, our guide to whether cordless lawn mowers need engine oil explains why battery-powered mowers don't have the same engine-oil needs as gas models.

Is bar and chain oil different from motor oil?

Yes, they serve different jobs. Bar oil is formulated to stay on an exposed moving chain and guide bar, while motor oil lubricates engine parts inside an engine.

Don't pour leftover motor oil into a chainsaw's bar-oil tank unless the saw manufacturer specifically permits that oil. The wrong lubricant may not cling or flow as the saw's oiling system requires.

If you're considering SAE 30, read our guide to bar and chain oil vs SAE 30 before choosing. For other possible alternatives, see what you can use as a bar and chain oil substitute, and follow the saw manual if its guidance differs.

What should you check before choosing an oil?

Start with the saw maker's oil recommendation and the conditions where you'll cut. Check whether the manual names a type of bar oil, gives a seasonal recommendation, or explains how to adjust oil flow.

Some oils are described as all-season, while others focus on features such as plant-based ingredients. Those labels can help you compare options, but they don't override the saw's instructions or guarantee that every oil suits every condition.

If you're still choosing a saw, our chainsaws buying guide covers factors such as the job, power source, and bar size. The right oil can't make an undersized or unsuitable saw right for a particular cut.

What are examples of bar and chain oil?

Oregon Premium Bar & Chain Oil and DEWALT Biodegradable Bar & Chain Oil are both options made for chainsaws and other bar-and-chain equipment. Compare the oil's stated use and features with your manual, then choose a container size that suits your storage and use.

Oregon highlights tackiness, reduced oil throw off, resistance to resin and sap buildup, and film strength for metal protection. It comes in a 1 gallon bottle.

DEWALT highlights lower friction and wear, plus use in applications where oil is lost during operation. Its 1 gallon jug may suit readers who want a larger supply; check your local rules and the saw manual before use around sensitive areas.

For brand-specific comparisons, browse bar and chain oils for Greenworks chainsaws, bar and chain oils for DeWalt chainsaws, and bar and chain oils for EGO chainsaws. Those guides can help narrow the options by saw brand.

Can four-cycle engine oil lubricate a chainsaw chain?

Four-cycle engine oil is made for an engine, so don't treat it as a bar-oil replacement without approval from the saw maker. The STP oil below is described for small engines such as lawnmowers, generators, tractors, and snow blowers.

This distinction matters because the bar-and-chain tank and the engine lubrication system have different jobs. Check your manual before pouring anything into either fill point, and keep containers labeled to avoid mixing them up.

How do you use and store bar oil?

Use the oil tank and refill steps described in your chainsaw manual. Keep the saw switched off and follow the maker's safety directions when checking or filling any reservoir.

Our guide to how to use bar and chain oil walks through the basic process, while how to oil an EGO chainsaw covers that brand's saws. If a cap is damaged or missing, see what to look for in a replacement chainsaw oil cap.

Store oil in its original, closed container and follow the label's storage guidance. If you need a container for pouring or storage, compare bar and chain oil containers and bar and chain oil by the gallon.

What is bar and chain oil, and when should you refill it?

Bar and chain oil is the lubricant supplied to a chainsaw's chain and guide bar, and you should refill it as the manual directs. Check the reservoir before work and during longer jobs, using the saw maker's safe procedure.

Choose a bar oil suited to your saw and cutting conditions, then keep it separate from engine oil. For a broader comparison, see our guide to the best bar and chain oil.

Frequently asked questions

What is bar and chain oil made for?

Bar and chain oil lubricates the moving chain where it contacts the chainsaw's guide bar. Its tack helps it cling to the chain as it travels around the bar, reducing friction and wear.

Use oil intended for this job and follow your saw's manual for the right type and filling instructions.

Can I use motor oil as bar and chain oil?

Motor oil is made for engine lubrication, while bar and chain oil is made to cling to an exposed moving chain and bar. Don't assume one can replace the other.

Check your chainsaw manual before using an alternative, and see our comparison of bar and chain oil vs SAE 30 for the tradeoffs.

Why does a chainsaw need a separate oil tank?

The chain and guide bar need a steady supply of lubricant as the chain moves, and this oil is used at the cutting assembly rather than circulated through the engine. A separate reservoir lets the saw's oiling system deliver it to the bar.

Check and refill it as the manual directs.

How can I tell if my chainsaw is getting bar oil?

Follow the manual's check for your saw's lubrication system, since designs and safe procedures vary. Some manuals describe observing oil delivery near the bar, but don't run a saw or handle its chain just to test it unless the maker's steps say how.

Stop using it if lubrication seems absent.