How to Use Bar and Chain Oil
To use bar and chain oil, fill the chainsaw’s separate oil reservoir with oil approved for your saw, then check that oil reaches the chain before cutting. Recheck the level during work and stop if the chain appears dry.
On this page (6 sections)
To use bar and chain oil, fill the chainsaw’s separate oil reservoir with oil approved for your saw, then check that the chain receives lubrication before cutting. Keep an eye on the oil level as you work, and stop if the chain appears dry or oil is not reaching it.
Bar and chain oil feeds through the saw’s lubrication system to reduce friction where the chain moves along the guide bar. Your manual identifies the correct oil, reservoir location, and any model-specific steps.
For background on what bar and chain oil is, see our explainer.
How do you fill the bar and chain oil reservoir?
Switch off the saw and fill only the marked oil reservoir. Keep the oil cap and the area around it clean so debris does not enter the tank.
- Place the saw on a stable surface and follow the manual’s shutdown instructions. For a gas saw, let it cool before refilling.
- Find the oil reservoir cap, which is separate from the fuel cap on gas saws.
- Wipe around the cap, open it, and add the recommended bar and chain oil. Use a funnel if it helps prevent spills.
- Stop at the fill mark or below the neck if the manual advises it. Avoid overfilling.
- Close the cap securely and wipe away any spilled oil before starting.
Some cordless saws have a transparent tank or level window. Check it before each use so you can see when a refill is needed.
How can you check that oil reaches the chain?
Use the lubrication check in your saw’s manual before cutting. Many manuals describe briefly running the chain while aiming the bar toward a light surface from a safe distance, then looking for a small trace of oil.
Keep the bar pointed away from yourself and anyone nearby, and make sure the chain has clear space. Don’t touch or approach the moving chain to inspect it.
If your manual gives a different procedure, follow that instead.
STIHL’s chainsaw instruction manual advises checking chain lubrication and the oil supply system. If oil does not appear during the prescribed check, switch off the saw and investigate before cutting.
When should you check or refill the oil?
Check the reservoir before starting and during longer jobs. Refill when the level approaches the low mark or the limit given in your manual.
Oil use depends on the saw, the bar and chain, and working conditions. Don’t assume that a full tank will last for the whole job.
If the oil level stays unchanged after use or drops unusually fast, stop and check the manual’s troubleshooting steps.
Which oil should you put in the reservoir?
Use bar and chain oil that your saw’s manual allows. The oil must work with the saw’s lubrication system and the conditions where you’re cutting.
Oregon Premium Bar & Chain Oil is described for gas and electric chainsaws, pole saws, hedge trimmers, and other equipment that uses slide bars or chain gears. Oregon says its tacky formula helps reduce oil throw-off and resist buildup from sap and gum.

All-season bar and chain oil described for gas and electric chainsaws, pole saws, and other equipment with chain gears.
See it on AmazonThe oil choice can differ from what you put in a gas saw’s engine. Compare bar and chain oil vs SAE 30 before substituting another oil, and use your manual as the final guide.
STP Premium Synthetic Blend 4 Cycle Small is engine oil for four-cycle equipment such as lawnmowers and generators. It is not described as bar and chain oil, so don’t pour it into the chain-oil reservoir; see our guide to whether cordless lawn mowers need engine oil for the difference between equipment types.

This 10W-30 oil is for four-cycle small engines, not a substitute for bar and chain oil in the chainsaw reservoir.
See it on AmazonDEWALT bar and chain oil is described as a soy-based, biodegradable lubricant for gas and electric saws and pole saws. DEWALT says its formula is designed to reduce friction and wear; confirm that it suits your saw and cutting conditions.

Soy-based bar and chain oil described for gas and electric chainsaws and pole saws.
See it on AmazonFor brand-specific options, compare bar and chain oil for Greenworks chainsaws and bar and chain oil for DeWalt chainsaws.
What should you do if the chain looks dry?
Stop the saw and check the oil level and feed system before resuming. A dry chain can point to an empty reservoir, blocked oil passages, or an issue with the oiler.
Switch off and disconnect the power source as directed by the manual. Check that the reservoir has oil, then look for visible debris around the bar’s oil inlet and groove.
Clean only as the manual permits, and don’t put your fingers near a chain that could still move.
If the tank is full but the chain still does not receive oil, don’t keep cutting to see if it improves. Follow the saw’s troubleshooting instructions or contact an authorized service provider.
How do you use bar and chain oil during regular chainsaw care?
Top up the reservoir as needed, verify lubrication, and keep the bar’s oil openings clear. Follow the manual for cleaning, chain adjustment, and storage.
A sharp, properly adjusted chain is also part of routine care. Our guides explain how to use a Stihl chainsaw chain sharpener and compare an automatic chainsaw chain sharpener.
If you’re still choosing a saw, start with what’s the best chainsaw.
For everyday use, choose oil approved for your model, fill the right reservoir with the saw off, and check that the chain receives oil before and during work. If lubrication fails, stop cutting and troubleshoot according to the manual.
Frequently asked questions
How often should I refill bar and chain oil?
Check the oil level before each use and during longer jobs, then refill when it approaches the low mark or your manual's limit. Oil use varies with the saw, bar, chain, and cutting conditions.
Stop if the chain looks dry or the reservoir does not seem to be feeding oil.
Can I use motor oil as bar and chain oil?
Use the oil type named in your chainsaw manual. Bar and chain oil is made for the bar and chain lubrication system, while four-cycle engine oil is intended for small engines.
Don't substitute engine oil or another fluid unless your saw's manual specifically allows it.
How can I tell if my chainsaw chain is getting oil?
Follow your manual's lubrication check. A common check is to point the bar toward a light surface from a safe distance and briefly run the chain; a small trace of oil should appear.
Keep the bar clear of people and objects, and stop if the test does not match the manual.
Should I fill the oil reservoir every time I use a chainsaw?
Check the reservoir before every session and top it up as needed, rather than assuming it is full. Some saws use more oil than others, so monitor the level during extended cutting and refill only with the saw off and cooled as directed.
About this guide: Our look at using bar and chain oil draws on maker specs, materials and what owners report. See how we research.



