How to Oil an EGO Chainsaw
To oil an EGO chainsaw, fill its bar and chain oil tank with suitable chain oil, then check that oil reaches the moving chain before cutting. Keep the saw switched off while filling and inspect the oil level during use.
On this page (9 sections)
- What oil does an EGO chainsaw need?
- How do you fill an EGO chainsaw with oil?
- How do you check the oil level before cutting?
- How can you confirm oil reaches the chain?
- Why should you avoid four-cycle engine oil?
- What should you clean after oiling an EGO chainsaw?
- How do you store an EGO chainsaw after oiling?
- What should you do if the oil cap leaks?
- How to oil an EGO chainsaw safely
To oil an EGO chainsaw, fill the bar and chain oil tank with chainsaw oil, check the level before cutting, and confirm that oil reaches the chain. Keep the saw switched off while opening the tank, and never substitute four-cycle engine oil for bar and chain oil.
Good lubrication reduces friction between the chain and guide bar. It also helps limit heat, wear, resin buildup, and metal scuffing during normal cutting.
What oil does an EGO chainsaw need?
An EGO chainsaw needs bar and chain oil, which is made to stay on the moving chain and guide bar. It is different from engine oil because a cordless EGO chainsaw does not use a gasoline engine.
For background, read what is bar and chain oil. The oil must remain on the bar as the chain moves, rather than quickly running off during cutting.
Use the oil recommended in your EGO owner's manual when the manual gives model-specific guidance. If you are comparing formulas, our guide to the best EGO chainsaw oil explains the main choices.
Which bar and chain oil suits an EGO chainsaw?
Oregon Premium Bar & Chain Oil is a practical choice when you want an all-season oil for gas and electric chainsaws, pole saws, hedge trimmers, and other equipment with slide bars or chain gears.

A 1 gallon bottle of all-season bar and chain oil for electric chainsaws and other equipment that uses bars or chain gears.
See it on AmazonIts high film strength is designed to help prevent wear and scuffing while protecting metal parts from corrosion and rust. The formula also resists buildup from resins, sap, and gum.
Choose it when you want one large bottle for repeated chain lubrication across compatible equipment. Store the bottle securely and keep the oil clean so dirt does not enter the EGO tank.
DEWALT Biodegradable Bar & Chain Oil is another option if soy-based, biodegradable oil and use around sensitive areas are priorities.

A 1 gallon biodegradable, non-toxic bar and chain oil for gas, electric saws, and pole saws.
See it on AmazonDEWALT describes this oil as plant-based and suitable for temperatures from -15°F to 500°F. Its intended uses include professional use and environmental conservation, with chain and bar lubrication for saws and pole saws.
Choose it when the oil's biodegradable, non-toxic positioning fits your work area. Keep the container closed between uses and follow the EGO manual for filling and storage instructions.
How do you fill an EGO chainsaw with oil?
Switch off the chainsaw, remove the battery, let the saw cool, and place it on a stable surface before filling the oil tank. The chain must not be moving while you open or close the oil cap.
- Set the chain brake and follow the safety steps in the EGO manual.
- Remove the battery before handling the oil cap or chain.
- Clean dirt and sawdust from around the oil cap.
- Open the oil cap slowly and pour in bar and chain oil.
- Stop before the oil reaches the cap opening.
- Close the cap firmly without cross-threading it.
- Wipe away spilled oil from the housing and handle.
- Reinstall the battery only after the cap is secure.
Keep the saw level while filling. A clean funnel can help control the pour, but do not force one into the opening if it does not fit.
Do not mix a dirty container, sawdust, and oil. Even small debris can move into the lubrication system and interfere with oil flow.
For a fuller process, see how to use bar and chain oil.
How do you check the oil level before cutting?
Check the oil tank before every cutting session and top it up when the level is low. A cordless saw can keep running while the bar and chain become under-lubricated, so do not wait for cutting problems to appear.
Look through the tank window if your model has one, or follow the inspection method in the manual. Check again during long cutting sessions, especially when working through dry wood or making many cuts.
A low tank is not the only possible cause of poor lubrication. Dirt around the oil opening, a blocked oil passage, a damaged bar groove, or a worn chain can also affect oil delivery.
Stop the saw if the chain looks dry, the bar becomes unusually hot, or cutting feels rough. Remove the battery before inspecting the bar, chain, oil cap, or surrounding area.
How can you confirm oil reaches the chain?
You can check oil delivery by running the saw briefly over a clean surface without letting the chain touch it. Follow the EGO manual's safety instructions and keep the bar pointed away from people, pets, and objects.
A light line or fine mist of oil near the bar tip suggests that oil is moving through the bar. Do not hold your hand near the chain to check for oil, and never touch the chain while the battery is installed.
If no oil appears, switch off the saw and remove the battery. Check the oil level, cap, bar groove, and visible oil passage areas.
Clear only what the manual allows, and contact EGO support if the problem remains.
Oil throw-off can happen when the chain is moving, so protect nearby surfaces and clothing. Excess oil does not prove that the saw is lubricating correctly.
Why should you avoid four-cycle engine oil?
Four-cycle engine oil belongs in compatible small engines, not in the bar oil tank of a cordless chainsaw. Using the wrong fluid can reduce the chain's ability to stay lubricated and may create maintenance problems.
STP Premium Synthetic Blend 4 Cycle Small Engine Oil is made for lawnmowers, generators, tractors, snow blowers, and other outdoor power equipment with four-cycle engines.

A 32 fl oz SAE 10W-30 four-cycle engine oil that helps show the difference between motor oil and chainsaw bar oil.
See it on AmazonThe bottle is useful for a different maintenance task, such as checking oil for a compatible lawnmower or generator according to that equipment's owner's manual. It is not a replacement for bar and chain oil in an EGO chainsaw.
This distinction also explains why a cordless mower does not need engine oil. See Do Cordless Lawn Mowers Need Engine Oil? for the related maintenance question.
What should you clean after oiling an EGO chainsaw?
Wipe spilled oil from the saw and remove loose debris from the bar area after each session. Cleaning helps you spot leaks, blocked passages, damaged parts, or an unusually dry chain before the next use.
Remove the battery before cleaning around the chain and guide bar. Use only the tools and cleaning method allowed by the EGO manual.
Inspect the bar groove, chain cutters, drive links, and oil cap area. Do not handle the chain casually, even when the motor is off, because sharp cutters can cause injury.
A clean chain and bar still need correct tension. Follow the EGO instructions for tension checks and adjustments, and replace damaged parts before cutting again.
How do you store an EGO chainsaw after oiling?
Store the saw with the battery removed, the chain protected, and the oil cap closed. Keep it in a dry place away from children, heat, and open containers that could spill.
Do not leave the saw resting in a way that lets oil run across the handle or battery area. Wipe the housing before storage and keep the oil bottle sealed.
If you are comparing equipment beyond EGO, our Chainsaws: The Complete Buying Guide covers the main saw types and use cases. A Milwaukee 16 inch chainsaw review can also help if you are comparing cordless saw designs.
What should you do if the oil cap leaks?
If the oil cap leaks, stop using the saw, remove the battery, and inspect the cap and sealing area. Wipe away oil, check for dirt or visible damage, and follow EGO's instructions for the next step.
Do not overtighten a cap or continue cutting with oil reaching the battery compartment. If you need a replacement part for another saw, our guide to what to look for in a replacement chainsaw oil cap explains the basic fit and sealing questions.
How to oil an EGO chainsaw safely
For how to oil an EGO chainsaw, use this order: switch off, remove the battery, clean the cap area, fill with bar and chain oil, close the cap, and check oil delivery before cutting.
Choose Oregon if you want an all-season oil in a 1 gallon bottle for several types of saw equipment. Choose DEWALT if biodegradable, non-toxic oil made from plant-based oils fits your work area.
Keep STP for compatible four-cycle engines, not the EGO chain and bar.
If your saw still shows poor oil delivery after the tank is filled, stop using it and follow the EGO manual or contact EGO support.
Frequently asked questions
What oil should you use in an EGO chainsaw?
Use bar and chain oil made for chainsaws, not four-cycle motor oil. Oregon Premium Bar & Chain Oil and DEWALT Biodegradable Bar & Chain Oil are both designed for chains, bars, and saw equipment.
Check your EGO manual for any oil guidance specific to your model.
How often should you add oil to an EGO chainsaw?
Check the oil tank before every cutting session and during extended work. Add oil when the level is low, and stop if the chain appears dry, the cut becomes rough, or oil is not reaching the bar.
The exact use interval depends on the saw, wood, temperature, and cutting conditions.
Can you use motor oil in an EGO chainsaw?
Motor oil is not the same as bar and chain oil. STP Premium Synthetic Blend 4 Cycle Small Engine Oil is made for four-cycle lawnmowers, generators, tractors, snow blowers, and other small engines, so it is not the right choice for lubricating an EGO chainsaw bar and chain.
How do you check EGO chainsaw oiling?
With the chain brake and safety steps set according to the EGO manual, run the saw briefly over a clean surface without touching the chain to it. A light line or fine mist of oil near the bar tip shows that lubrication is reaching the chain.
Never test near people, pets, or loose objects.
About this guide: Our look at oiling an EGO chainsaw draws on maker specs, materials and what owners report. See how we research.



