Guide

How to Use a String Trimmer

Updated on · By the Yard Volt Lab team

To use a string trimmer, wear eye protection, hold the head level, and sweep the line through grass with short, controlled movements. Work around obstacles carefully, keep people away, and stop before clearing jams.

On this page (11 sections)
  1. What is a string trimmer used for?
  2. How do you prepare a string trimmer?
  3. How do you start a string trimmer?
  4. What is the correct string trimmer technique?
  5. How do you use a string trimmer for edging?
  6. How do automatic line feed systems work?
  7. How do you choose between these cordless trimmers?
  8. How do you keep a string trimmer under control?
  9. What line should you use in a string trimmer?
  10. How do you care for a string trimmer after use?
  11. What is the safest way to use a string trimmer?

To use a string trimmer, wear eye protection, hold the cutting head level, and sweep the line through grass with controlled movements. Keep the line away from people, pets, windows, cars, and fragile plants, and stop the tool before making adjustments.

A string trimmer, also called a weed trimmer, line trimmer, weed eater, or grass trimmer, uses spinning nylon line to cut grass and light weeds. It fills the gaps left by a mower around fences, trees, garden beds, posts, and walkways.

What is a string trimmer used for?

A string trimmer is used for cutting grass and weeds in places a mower cannot reach. It can clean narrow strips beside fences, trim around tree trunks, and tidy the edges of lawn areas.

A trimmer is not the same as a brush cutter. For thicker woody growth, compare the differences in our guide to brush cutter vs string trimmer.

Before choosing a tool, learn the names used for this category. Our string trimmer and weed eater guide explains the basic designs, power sources, shafts, cutting widths, and line systems.

How do you prepare a string trimmer?

Prepare the trimmer by checking the guard, line, battery or power connection, handle, and cutting head. Read the tool's instructions before starting, especially if this is your first time using that model.

Wear safety glasses, long pants, sturdy shoes, and hearing protection when recommended. Tie back loose clothing and keep children and pets away from the work area.

Inspect the ground for stones, sticks, wire, and other objects. The spinning line can throw debris, so move anything loose before you start.

For cordless models, install the battery only after the tool is in a safe position. For corded models, keep the cable behind you and away from the cutting path.

Which string trimmer shape should you choose?

Choose a shaft shape based on where you will cut and how you want to control the tool. A straight shaft can suit users who need reach under shrubs, while a curved shaft may feel easier to handle in smaller areas.

Our comparison of straight shaft vs curved shaft trimmers covers the trade-offs. A shorter or lighter design may be easier for detail work, while a wider cutting path can cover more grass with each pass.

How do you start a string trimmer?

Start the trimmer with the cutting head away from your body and other people. Hold it firmly with both hands, place the head near the grass, and bring the motor up to its normal operating speed before cutting.

Keep the line head parallel to the ground for ordinary trimming. The line should cut the grass near its tips, not dig into soil or scrape across hard surfaces.

Let the line do the work. Pressing the head into thick grass can slow the motor, use more battery, and feed out line faster.

What is the correct string trimmer technique?

The correct technique is to sweep the trimmer slowly from side to side while walking forward. Use the outer section of the line, where speed is highest, and make several light passes through tall growth.

Keep your arms relaxed and move your upper body with the tool. Avoid twisting your back or reaching too far to one side.

For dense grass, cut the upper section first, then make a second pass lower down. This reduces the load on the motor and gives you more control.

When trimming near a wall or fence, keep the head far enough away to avoid damaging the surface. Hard contact can wear the line quickly and send debris toward you.

How do you use a string trimmer around plants?

Use a slow, shallow sweep around plants and keep the line away from stems and bark. Grass and thin weeds may look similar to a young plant when you are working quickly.

A spacer guard can help define a safe distance. The WORX 20V 12" 2-in-1 Cordless String Trimmer has an adjustable spacer guard, a 12 in cutting diameter, a 5.5 lb machine weight, and a 90-degree tilting head.

Use the guard as a guide, not as permission to cut close to delicate stems. Stop often and check your distance when working around flowers, ornaments, or young trees.

How do you use a string trimmer for edging?

To edge with a string trimmer, turn the cutting head so the line runs vertically and follow the pavement or bed border slowly. Keep the line just above the edge rather than digging into soil.

Some tools convert to an edging position. The WORX model changes from a string trimmer to an in-line edger, while its rubberized wheels help guide the edging path.

For a detailed walkthrough, see how to edge a lawn with a string trimmer. Make the first pass shallow if the border has grown over, then refine the line on a second pass.

Do not edge near loose gravel without checking where debris may travel. Hard surfaces can also wear nylon line faster than grass.

How do automatic line feed systems work?

Automatic or command-feed systems release more line as you work, depending on the tool's design. Keep the head clear and follow the instructions for feeding, spool replacement, and line diameter.

The BLACK+DECKER 20V MAX Weed Eater uses an automatic line feed system and has a 10 in cutting width. Its adjustable height and handle are intended to help with control, and the kit includes 2 batteries and a charger.

A narrower cutting width can help with close work around beds and posts. It may take more passes to cover an open strip of lawn than a wider head.

If you are comparing names, our guide to weed eater vs string trimmer explains why these terms often refer to the same type of tool.

How do you choose between these cordless trimmers?

Choose based on cutting width, battery setup, edging needs, and how much equipment you want in the box. A wider head covers more grass per pass, while extra batteries can reduce interruptions between tasks.

The BLACK+DECKER 20V MAX String Trimmer and Edger has a 12 in cutting swath, 6,200 rpm speed, a 5.7 lb weight, an automatic feed spool, and 1 included 2.0 Ah battery.

Its 2-in-1 design suits readers who want one tool for trimming and edging. The single included battery may suit smaller jobs, while a second battery can be useful when the work area is larger.

For another comparison, see our guide to the best cordless string trimmer and blower combo. If you want a broader shortlist, compare our top rated string trimmer recommendations.

How do you keep a string trimmer under control?

Keep the trimmer under control by using both hands, keeping the head at a steady height, and matching your pace to the grass. Do not swing wider than your shoulders or cut behind your body.

Use the shoulder strap if your model includes one and its instructions recommend it. Adjust the handle so your wrists stay comfortable and the cutting head remains easy to guide.

Stop when the motor sounds strained, grass wraps around the head, or the line stops feeding. Turn off the tool, remove the battery or disconnect power, and wait for all movement to stop before clearing anything.

What line should you use in a string trimmer?

Use the line diameter and spool type specified for your trimmer. Thicker line may not feed correctly in a head designed for a smaller diameter, while the wrong spool can cause jams or poor cutting.

For tougher weeds, check the thickest trimmer line your head supports.

Keep replacement line dry and store it away from direct sun. Wind it evenly if the instructions allow manual refilling, with no crossed layers that could prevent feeding.

If you run out of the correct line, do not substitute wire, cable, or another rigid material. Our guide to a string trimmer line alternative explains which substitutes to avoid and what to check first.

How do you care for a string trimmer after use?

After use, remove the battery or disconnect power, brush away grass, and inspect the guard and spool. Let the tool cool before storing it in a dry place.

Check the line head for wrapped grass and remove it only after the tool is fully stopped. Wipe dirt from the housing without spraying water into the motor or battery area.

Store batteries according to their instructions. Keep the trimmer where the line head will not be damaged by heavy objects, moisture, or extreme heat.

What is the safest way to use a string trimmer?

The safest approach is to clear the work area, wear eye protection, keep people away, and stop the tool before every adjustment. Point the cutting head away from yourself and others during startup and transport.

Work in good light and avoid cutting on unstable ground. Take extra care on slopes, where a foot can slip while the rotating head continues to move.

Pick the WORX model if you want included 20V batteries, a tilting head, and built-in support for edging. Pick the BLACK+DECKER combo if automatic feeding, adjustable handling, and 2 batteries matter more.

Pick the BLACK+DECKER LST300 if you want a 12 in trimmer and edger with 1 included 2.0 Ah battery.

Frequently asked questions

What is a string trimmer?

A string trimmer is a handheld yard tool that cuts grass and weeds with a rapidly spinning length of flexible line. It is useful around trees, fences, beds, posts, and lawn edges where a mower cannot reach.

The line cuts vegetation without using a solid metal blade.

What is a weed trimmer?

A weed trimmer is another common name for a string trimmer. Weed eater, line trimmer, and grass trimmer can also describe the same general type of tool, although brand names and designs vary.

Check the cutting width, line size, power source, and included parts before choosing one.

How do you use a string trimmer on tall grass?

Cut tall grass in stages instead of forcing the head through the full height at once. Start near the top, use a controlled side-to-side sweep, and lower the cutting height gradually.

Keep the head level and avoid thick woody growth unless the tool is designed for that work.

Can you use a string trimmer for edging?

Yes, many string trimmers can edge if the head rotates or the tool converts to an edging position. Turn the line vertically, follow the pavement edge slowly, and keep the line from striking concrete.

A wheeled edger feature can help guide a straighter border.