Buying guide

How to Choose EGO String Trimmer String Size

Updated on · By the Yard Volt Lab team

Match the replacement line diameter to your EGO trimmer model and head. Many EGO 15-inch trimmers use .095-inch line, but you should confirm the required size before loading a new spool or cutting replacement pieces.

On this page (8 sections)
  1. What EGO string trimmer string size should you choose?
  2. Does 2.4 mm equal .095-inch EGO line?
  3. Which replacement line length fits your routine?
  4. How do you match line size to an EGO model?
  5. What is the difference between roll and pre-cut EGO line?
  6. How should you load and care for EGO trimmer line?
  7. Is twisted line the best choice for every EGO trimmer?
  8. How do you choose the right EGO string trimmer string size?

The right EGO string trimmer string size is the diameter approved for your exact trimmer model and head. The options covered here are .095-inch line, also described as 2.4 mm, but you should confirm your model before replacing the line.

This matters because a small change in diameter can affect the whole job. The line has to pass through the head, sit where it should, and cut in a way that suits the grass and weeds in front of you.

A line that is too thick for the head may bind, feed poorly, or refuse to load cleanly. A line that is too thin may match the opening but still feel wrong for the work, with less presence against heavier growth and more frequent changes.

Shape matters too, although diameter is the first check. The line here is twisted, so it has a different profile from round or square line and it may behave differently as it cuts and wears.

For most home yards, the key question is simple. Does your EGO trimmer or head specifically call for .095-inch line?

If the answer is yes, then shopping in that size keeps the match straightforward.

If you are not sure about your model, pause before you order. Check the label on the trimmer, the manual, or the head itself for the approved diameter and loading method.

That short check can save time later. It also helps you avoid buying line that looks close but does not fit the head you actually own.

If you are still comparing tool types, start with our string trimmer weed eater guide or compare the best EGO string trimmer options before buying replacement line.

That step is useful if a worn head, a different cutting width, or a new tool may solve the problem better than new line alone.

What EGO string trimmer string size should you choose?

Choose .095-inch line when your EGO trimmer or head specifies .095 inch. This is the size used by all 3 replacement options in this guide.

The metric equivalent is about 2.4 mm. You may see both measurements used for the same type of line, so compare the diameter rather than treating the different labels as different sizes.

In practical terms, .095 inch is a mid range trimmer line size. It is thick enough for routine yard work around beds, fences, paths, and lawn edges, while still fitting heads built for this diameter.

It is not a universal size for every trimmer. Some heads are built for thinner line, and some are built for heavier line, so the spec on your model should come before any preference you may have.

Check these details before ordering:

  • The model number printed on the trimmer or in its instructions
  • The line diameter approved for the head
  • Whether the head takes loose line or pre-cut sections
  • Whether the line is loaded manually or through a Powerload system
  • The amount of line you want to keep available

This check also helps with multi-head tools. An attachment may share a power head with other tools, but the string trimmer attachment still has its own head and its own line requirements.

EGO describes the first option below as compatible with its POWER+ 15-inch string trimmers and several multi-head 15-inch attachments. The second and third options are also designed around .095-inch line and compatible EGO heads identified in their product information.

That shared diameter makes comparison easier. You can focus on format, such as roll or pre-cut pieces, and on small details such as dual color line, instead of guessing at size.

Still, do not skip the model check. Compatibility wording can cover a range of trimmers, and your head instructions remain the safest guide for what to load.

Does 2.4 mm equal .095-inch EGO line?

Yes. 2.4 mm and .095 inch describe nearly the same line diameter for normal replacement-line shopping.

The small difference comes from converting between metric and imperial measurements. Rounding is normal here, so the two labels should be treated as the same size class for these EGO options.

That is why you may see one product listed as 2.4 mm and another as .095 inch, even when both are meant for the same EGO heads. The name changes with the market and the packaging, not with the fit.

The diameter is only one part of the match. Shape also matters.

These options use twisted line, which gives the line a different profile from round or square line. The head must still be designed to handle the diameter and style you choose.

Twisted line can feel like a good middle ground for many users. It is often chosen for a balance of cutting action and control, and it is the profile used by the genuine EGO line in this guide.

Shape can also affect how line feeds and how it wears. A shape that looks similar in the package may still move through the head in a different way once it is under load.

For that reason, match the full line description, not only the number. Diameter, shape, and loading style should all line up with the head in use.

When you need a different shape or cutting profile, see our guide to the best string trimmer line and compare the line type with your EGO head instructions.

If your head is designed for twisted .095-inch line, staying with that profile is usually the simplest path. Changing shape should be a deliberate choice, not a guess made at the shelf.

Which replacement line length fits your routine?

Choose a long roll for regular seasonal replacement or pre-cut pieces when you want a quicker, simpler loading process. The best format depends on how often you replace line and how much measuring you want to do.

The 50M option contains 160 ft of professional-grade twisted line. That suits you if you want one continuous supply available for repeated reloads.

With a roll, you can cut a fresh piece whenever the head needs it. This works well if you trim often, keep the trimmer in regular use, and do not mind measuring and cutting before each reload.

It also suits larger yards or properties with a lot of edges. A single supply can cover many sessions, and you are less likely to run out part way through the season.

Pre-cut pieces suit a different routine. They remove measuring and cutting from the reload task, which can be handy if you prefer a quick change or if you store line in a small space.

The trade-off is control. With pre-cut sections, you use the length supplied in the pack, so you need to follow the head instructions for how that length is loaded.

Think about storage as well. A roll is compact for its total length, while loose pre-cut pieces need a dry place where they stay clean, straight, and easy to find.

For care, keep either format away from direct heat and moisture. Line that is dirty, kinked, or brittle can be harder to load and less pleasant to use.

Pick the roll if you value supply and control. Pick pre-cut pieces if you value speed and simplicity at reload time.

The pre-cut options contain 14 ft sections. They suit you if you prefer measured pieces instead of cutting each section from a roll.

The dual-color design can make centering a pre-cut piece easier. That does not change the diameter, so the same compatibility check still applies.

How do you match line size to an EGO model?

Match the line to the model and head specification, then confirm that the replacement line's compatibility includes your tool. Do not choose a diameter only because it looks close to the old line.

The EGO products here identify compatibility with EGO POWER+ string trimmers. The 50M line names ST1500, ST1500-S, ST1500-F and ST1500-SF models, along with the AL2450S part number.

It also identifies the STA1500, MST1501 and MHC1502 multi-head attachments.

The 5-pack of twisted line identifies EGO POWER+ string trimmers, the STA1500 attachment and heads designed to handle .095-inch line. The dual-color 5-pack identifies all EGO string trimmers and heads designed for .095-inch line.

These details show why model checking matters. Two EGO tools may look alike, yet the attachment or head fitted to them can change what line should be used.

A simple routine works well. Find the model number first, then check the head for the approved diameter, then compare that with the line you plan to buy.

Do not rely on old line alone as your guide. Old line can be worn, stretched, or cut down, and its remaining length tells you little about the diameter the head was designed for.

For the most reliable match, compare the model number and head instructions with the diameter and compatibility information before loading the line. You can also review what EGO Powerload does if your trimmer uses that loading system.

If the head uses a Powerload system, follow that method exactly. A diameter match is not enough if the loading style does not suit the head.

What is the difference between roll and pre-cut EGO line?

A roll gives you more control over how much line you prepare, while pre-cut line reduces measuring and cutting. Neither format changes the need to use the approved diameter.

A roll can be useful when you reload several times during the season. Cut each piece to the length required by your head instructions, and keep the unused line clean and dry between uses.

The 50M roll holds 160 ft of .095-inch twisted line, so it can serve as a main supply rather than a short term fix. That can suit regular users who trim weekly or who maintain longer edges.

With a roll, you also control waste. You can cut a piece for a small touch up job, or a longer piece for a full session, as long as the head instructions allow it.

Pre-cut line is easier when you want ready-to-load sections. The 14 ft options here are sold as 5-packs, so you can keep prepared pieces together until the head needs a reload.

That format can suit people who do not want to measure, or who load the trimmer in a hurry before a yard session. It can also suit beginners who prefer a set length over a roll and scissors.

The honest trade-off is flexibility. Pre-cut pieces are convenient, but you cannot adjust the length to suit a different head or a different task without cutting them down.

Choose the roll if you want a 160 ft supply. Choose a pre-cut pack if consistent pieces and faster preparation matter more to you.

Either way, store the line well. Keep it dry, clean, and away from heat, and inspect it before loading so you start with straight, undamaged line.

Also check the head as you go. A clean head, free of wrapped grass and dirt, will load more evenly and help the line feed as intended.

How should you load and care for EGO trimmer line?

Load the line according to the head instructions, keeping the piece straight and centered as required. Do not force line through a head that is not designed for its diameter or loading method.

Before replacing line:

  1. Remove the battery from the trimmer.
  2. Clear grass, dirt and wrapped weeds from the head.
  3. Confirm the required diameter and loading method.
  4. Measure or select the correct line length.
  5. Insert and wind the line evenly if the head uses a spool.
  6. Check that the line exits evenly from both sides.
  7. Refit the head cover or secure the loading system before use.

Store unused line away from direct heat and moisture. Inspect the line before use, and replace it when it becomes too short, damaged or difficult to feed.

If your current head is worn or you are considering a different cutting method, read whether you can replace a string trimmer head with a blade before changing parts.

Is twisted line the best choice for every EGO trimmer?

Twisted line is a practical match when your EGO head accepts .095-inch line and you want the products covered here. It is not automatically right for every head, diameter or cutting task.

The 50M roll gives the most total line in this guide. The standard 5-pack gives ready-to-load 14 ft pieces, while the dual-color version adds a visual center point that may make loading easier.

Your choice should follow this order:

  1. Confirm the model and head.
  2. Confirm the approved diameter.
  3. Choose roll or pre-cut format.
  4. Choose standard or dual-color line if both fit.
  5. Keep the head clean and load the line evenly.

For more line-specific comparisons, see our guide to the best trimmer line for EGO. If your trimmer needs a new power source rather than new line, compare the best EGO string trimmer battery replacement.

How do you choose the right EGO string trimmer string size?

Choose .095-inch, or about 2.4 mm, when your EGO model and head specify that diameter. Pick the 50M roll for repeated reloads, the standard 5-pack for ready-to-use sections, or the dual-color 5-pack if finding the center during loading is useful.

A line diameter match comes first. After that, choose the length format and loading style that fit your maintenance routine.

If you trim often and like control, the roll gives you a 160 ft supply to cut as needed. If you prefer less fuss, pre-cut 14 ft sections keep reloads simple.

The dual-color option adds one small but useful detail. The color change can help you find the center of the piece during loading, which may make a manual reload smoother.

None of these choices removes the need to check your model. Confirm the approved diameter, the head type, and the loading method before you buy or load the line.

Keep the head clean, store line in a dry place, and replace line that is too short or damaged. Those habits matter as much as the package you choose.

If you mainly need clean edging around paths and beds, compare an edger vs string trimmer before replacing the line.

That comparison may show that your current trimmer is fine with fresh .095-inch line, or that a different tool suits the job better.

Frequently asked questions

What size string does an EGO trimmer use?

Many EGO 15-inch string trimmers use .095-inch line, which is about 2.4 mm. The correct EGO string trimmer string size depends on the model and trimmer head, so confirm the required diameter before loading line.

A head designed for .095-inch line should not be forced to accept a different size.

Is EGO trimmer line 0.095 or 0.105?

The EGO line options covered here use .095-inch line, also described as 2.4 mm. That does not mean every EGO trimmer accepts only this diameter.

Check your model instructions and head specifications first, especially if you are replacing line on a multi-head attachment.

How long should EGO trimmer line be?

The correct piece length depends on the trimmer head and loading method. EGO replacement options include a 160 ft roll and pre-cut 14 ft sections, but those package lengths are not automatically the amount loaded into one head.

Follow the head instructions when measuring or inserting line.

Can I use thicker string in an EGO trimmer?

Use only a diameter approved for your EGO trimmer and head. Thicker line may not feed, load or cut correctly if the head is designed for .095-inch line.

A compatible .095-inch twisted line is the safer choice for the EGO models and heads identified with that size.