How to Load String into an EGO Trimmer
To load an EGO string trimmer, remove the old line, align the new line with the head marks, feed it through, and wind or Powerload it evenly. The exact steps depend on the trimmer head and line size.
On this page (8 sections)
- What should you do before loading an EGO trimmer?
- How do you load an EGO Powerload head?
- How do you manually load an EGO spool?
- What is the easiest way to find the line center?
- Why does EGO Powerload stop working?
- How do you prevent line problems after loading?
- What should you check after loading?
- Which EGO line should you choose?
To load an EGO string trimmer, remove the battery, take out the old line, feed the correct diameter through the head, and wind it evenly. Powerload models wind the line with a button, while other EGO heads use a manual spool or pre-cut coils.
The key is to identify your head before you start. EGO trimmers can use different loading methods, so do not force line through a head that does not match the instructions for your model.
Knowing the head type matters because the loading process changes from one design to another. A Powerload head expects the line to be fed through and then wound by the mechanism, while a manual head expects you to anchor and wind the line by hand.
It also helps to know which line diameter your head accepts before you cut anything. The products in this guide use 0.095 inch line, also shown as 2.4 mm, but your manual remains the best source for your exact model.
Take a minute to find the model number and check the manual if you are unsure. That small check can save time later and helps you avoid jams caused by the wrong diameter or the wrong loading method.
Once you know the head type and the correct line size, the actual loading steps are much simpler. You can focus on keeping the line centered, winding it neatly, and leaving the right amount outside the head for normal use.
This guide covers the main methods used on compatible EGO models. If your head looks different from the steps described here, stop and follow the instructions for your trimmer instead.
What should you do before loading an EGO trimmer?
Remove the battery before touching the trimmer head. This prevents an accidental start while you clear old line or work near the cutting area.
Place the trimmer on a stable surface. Wear gloves if the old line is sharp, and clear grass or dirt from the head so the line can pass through its openings.
Check the diameter printed in your manual or on the head. The products covered here use 0.095-inch line, which is also about 2.4 mm.
If you are still choosing a machine, our guide to string trimmer weed eater options explains the main head and shaft differences. You can also compare the best EGO string trimmer models before buying replacement line.
How do you load an EGO Powerload head?
Feed the line through the head until both ends are even, then press the Powerload control to wind it. Keep the line straight as it enters the head so it does not cross or bunch inside.
Start by removing the battery and pulling out any remaining line. Rotate the head until its loading marks or openings are in the correct position.
Cut a length of compatible line according to your manual. Push the line through the head until the same amount extends from both sides.
Press the Powerload button or control named in your model's instructions. Let the head wind the line at its own pace, and stop when the recommended amount has loaded.
The line should wind in neat, even layers. If it piles up on one side, remove it and start again rather than trying to pull the jammed line through.
What line helps with EGO Powerload replacement?
The EGO POWER+ 50M 2.4mm Premium Quality Twist provides 160 ft of .095 professional grade twisted line. It is compatible with all EGO POWERplus 15-inch string trimmers and the EGO multi-head 15-inch String Trimmer Attachment STA1500, MST1501, and MHC1502.

A 50M spool of 2.4 mm twisted line for EGO 15-inch trimmers and listed EGO multi-head attachments.
See it on AmazonThis is the practical choice when you want line on hand for repeated replacements. Its long length suits seasonal maintenance, while the 2.4 mm diameter matches heads designed for .095-inch line.
Check your model before ordering. Compatibility with listed 15-inch EGO trimmers does not mean every trimmer head accepts every line diameter.
For more line choices, see our guide to the best trimmer line for EGO.
How do you manually load an EGO spool?
Manual loading uses the same safety steps, but you wind the line by hand instead of pressing Powerload. Remove the spool or expose the head according to your model's instructions.
Pull out the old line and clean the spool area. Find the anchor hole or slot, insert one end of the new line, and wind it in the arrow direction shown on the spool.
Keep each wrap beside the previous wrap. Crossed loops can cause poor feeding, uneven cutting, or a jam when the head spins.
Leave the correct amount of line outside the head. Too much line can make the trimmer strike its guard or overload the cutting area.
Are pre-cut coils easier for line replacement?
Pre-cut coils can make EGO string trimmer line replacement simpler because you don't need to measure a long spool. The EGO Power+ Twisted String Trimmer Lines are 0.095-inch pre-cut coils with 5 pieces, and each coil is 14 ft long.

Five pre-cut 14 ft coils of .095 twisted line for compatible EGO trimmer heads.
See it on AmazonThis option suits you if you want a ready-to-load length for each replacement. The line is compatible with EGO POWER+ string trimmers, the STA1500 attachment, and heads designed for .095-inch line.
Feed one coil through the head, keeping both sides even, then wind it according to the head design. Do not combine extra pieces or use a coil that is too large for the spool.
What is the easiest way to find the line center?
Use dual-color line to locate the center while loading. Keep the two colors balanced on both sides of the head, then wind the line evenly.
The EGO POWER+ 095” Dual Color Pre-Cut Trimmer Line includes 5 pre-cut coils of 0.095-inch professional grade line. Each coil is 14 ft long and is designed for EGO 15-inch string trimmers and heads that handle .095-inch line.

Five 14 ft dual-color .095 coils that make the line center easier to see during loading.
See it on AmazonThe color change helps you check whether the line is centered before winding. That can reduce guesswork when you are learning how to string an EGO trimmer.
This line is a good fit when visual alignment matters more than buying a long spool. It is also a straightforward option for occasional line replacement.
Why does EGO Powerload stop working?
Powerload usually needs a clear path, even line ends, and the correct diameter. Remove the battery before checking any problem.
Inspect the head opening for grass, dirt, or a broken line fragment. Pull out tangled line and check whether the line crossed inside the head.
Confirm that the line is centered before pressing the Powerload control. If one side is much longer, the spool can wind unevenly and stop.
Don't keep pressing the button against a jam. Follow the steps in why your EGO string trimmer Powerload is not working for a focused troubleshooting guide.
EGO's official support resources can help you find instructions for your exact model. Use the model manual when its loading method differs from a general guide.
How do you prevent line problems after loading?
Wind the line tightly and evenly, then keep the head clean. Loose loops can catch inside the spool, while dirt can block the line path.
Use only the diameter your head accepts. A thicker line may not feed correctly, and a thinner line may not suit the cutting setup.
Store spare line away from direct heat and moisture. Keep pre-cut coils together so they stay straight and easy to handle.
Keep the spool area clean between replacements and clear away grass or grit that builds up around the openings. A clean head lets the line move more freely and makes the next loading job easier.
Check the line length outside the head before you start trimming. Too much line can strike the guard or put extra strain on the cutting area, while too little line may not cut well.
If your trimmer includes Line IQ, read what EGO Line IQ does on a string trimmer before changing the line setup. Automatic line management can affect how you judge the correct amount outside the head.
What should you check after loading?
Reinstall the head parts, confirm the line moves freely, and keep the guard in place before using the trimmer. Refit the battery only after the head is complete.
With the trimmer off, pull each line end gently. It should move without binding, and both ends should be similar in length.
Start at low speed in a clear area. Stop immediately if the head vibrates, the line fails to feed, or the line strikes the guard.
For more equipment choices, compare a straight shaft vs curved shaft trimmer before replacing your machine. If you plan to edge around a larger lawn setup, see which edger attachment fits a lawn tractor.
Which EGO line should you choose?
Choose the 50M 2.4 mm twist line if you want a longer supply for compatible EGO 15-inch trimmers and listed multi-head attachments. Choose the 5-pack of pre-cut twisted coils if you prefer ready-to-load 14 ft pieces.
Choose the dual-color pre-cut line if seeing the center helps you align the coil. In every case, match the line diameter and loading method to your exact head.
The simple rule for how to load an EGO string trimmer is safe power removal, centered line, even winding, and no forced parts. If Powerload still fails after clearing the head and correcting the line, stop using the trimmer until you can follow the model-specific instructions.
Frequently asked questions
How do you load string into an EGO trimmer?
Remove the battery, remove worn line, and check the head for its loading marks or Powerload opening. Cut the correct line length, feed it through the head, then wind it evenly or use the Powerload function if your model has it.
Follow the manual for your exact head.
What size line does an EGO string trimmer use?
The products covered here use 0.095-inch line, also written as .095 or 2.4 mm. Confirm that your head accepts this diameter before loading it.
Some EGO trimmers and attachments may require a different line size, so the model manual takes priority.
How does EGO Powerload work?
Powerload winds the line into a compatible EGO trimmer head after you feed the line through the head. Align the line, press the Powerload button, and let the mechanism wind it.
If the line does not move, remove the battery and check for a blocked opening, uneven line, or incorrect line diameter.
Why is my EGO trimmer line not feeding?
Line may not feed when it is wound unevenly, too long, crossed inside the head, or incompatible with the head diameter. Remove the battery, inspect the spool area, pull out the line, and reload it with both ends even.
Replace damaged line before trying again.
About this guide: Our look at loading string into an EGO trimmer draws on maker specs, materials and what owners report. See how we research.



