Which Direction Does a Chainsaw Chain Go?
The chainsaw chain's cutting teeth point forward along the top of the guide bar, toward the bar tip. The sharp edge should face away from the saw body on the top run, not toward it.
On this page (11 sections)
- Which Direction Does a Chainsaw Chain Go?
- How can you tell the chainsaw chain direction?
- What does a backward chainsaw chain look like?
- How do you install a chainsaw chain in the right direction?
- What else must match besides chainsaw chain direction?
- Which chain helps with an 18 in guide bar?
- Which chain helps with a 16 in .043 gauge bar?
- Which chain helps with a 16 in .050 gauge bar?
- How tight should a chainsaw chain be?
- What should you check after installing the chain?
- What is the correct chainsaw chain direction?
Which Direction Does a Chainsaw Chain Go?
The chainsaw chain's cutters point forward along the top of the guide bar, toward the bar tip. The sharp cutting edge should face away from the saw body on the top run, while the chain returns toward the saw body underneath the bar.
A chain can look correctly fitted even when it is backward. Check the cutter shape before tightening the side cover or starting the saw.
How can you tell the chainsaw chain direction?
Look at the small teeth along the chain's outside edge. Each cutter has a sharp working edge and a sloped top plate.
On the top of the guide bar, those cutters should point toward the nose.
The chain's drive links sit inside the guide bar groove. They keep the chain tracking around the bar, but they don't show the cutting direction as clearly as the cutters do.
Stand beside the saw with the guide bar pointing away from you. On the top run, the pointed cutting edges should face away from the powerhead.
On the bottom run, the cutters will face back toward the powerhead as the chain travels around the bar.
What does a backward chainsaw chain look like?
A backward chain has its cutters facing toward the saw body on the top run. The chain may still sit in the guide bar groove and appear tight, so checking only the fit is not enough.
The cutter's sharp edge should lead as the chain moves across the top of the bar. If the sloped back of the cutter leads instead, the chain direction is wrong.
A backward chain won't cut wood as intended. Stop and correct it before using the saw, even if the chain moves freely by hand.
How do you install a chainsaw chain in the right direction?
Disconnect the saw from its power source, engage the chain brake, and place the top cutters toward the guide bar tip. Use the owner's manual for the exact cover, tensioner, and removal steps.
- Turn off the chainsaw and remove its battery, unplug it, or disconnect the spark plug as the manual requires.
- Engage the chain brake and wear suitable protective gloves.
- Loosen the guide bar nuts and remove the side cover.
- Fit the chain into the guide bar groove, starting at the bar tip if that makes the job easier.
- Make sure the top cutters point toward the bar tip.
- Seat the drive links fully in the groove and around the drive sprocket.
- Refit the side cover, then adjust tension according to the manual.
- Rotate the chain by hand with gloves and check that it moves smoothly.
- Confirm the chain brake and other safety controls before cutting.
Keep your fingers away from the cutters. Even a chain that is not powered can cause a cut.
What else must match besides chainsaw chain direction?
The chain must match the guide bar's pitch, gauge, length, and drive link count. For a 12-inch DEWALT saw, compare 12-inch DEWALT replacement chains.
A correct cutter direction cannot make an incompatible chain safe or useful.
Pitch describes the spacing between the chain's rivets. Gauge describes the thickness of the drive links that sit in the guide bar groove.
Length and drive link count identify how the chain fits around the bar.
Check the owner's manual or the guide bar side stamp before ordering. If the markings are hard to read, record the chainsaw and guide bar part numbers and ask the chain brand for help.
The Chainsaws: The Complete Buying Guide explains the main saw choices, including the guide bar and chain details that affect fit.
What should you check before buying a replacement chain?
Check all 4 measurements: bar length, pitch, gauge, and drive link count. Do not choose by length alone.
For example, these 3 chains all use 3/8 in low-profile pitch, but their other measurements differ:
- The KAKEI 18 in chain uses .050 in gauge and 62 drive links.
- The KAKEI 16 in chain for Stihl models uses .043 in gauge and 55 drive links.
- The KAKEI 16 in chain for Craftsman, Poulan, Ryobi, Echo, and Greenworks models uses .050 in gauge and 56 drive links.
Those differences affect fit. Compare the markings on your saw before selecting a replacement.
Which chain helps with an 18 in guide bar?
The KAKEI 18 Inch Chainsaw Chain 3/8" LP suits a saw that requires an 18 in chain with 3/8 in low-profile pitch, .050 in gauge, and 62 drive links. It is a 3-chain pack with semi-chisel cutters.

An 18 in, .050 gauge chain with 62 drive links for a matching guide bar, supplied as a 3-chain pack.
See it on AmazonThe chain is identified as S62 and is compatible with devices including EGO CS1804, Echo CS-400, Greenworks chainsaws, Kobalt chainsaws, and Poulan Pro PR4218. Confirm your exact guide bar measurements before ordering.
KAKEI describes the chain as made with German steel and says its rivets are hardened and quenched. It also includes protective oil for corrosion resistance.
For more options after confirming your measurements, compare the Best Replacement Chainsaw Chains.
Which chain helps with a 16 in .043 gauge bar?
The KAKEI Chainsaw Chain 16 Inch 3/8" LP suits a matching 16 in guide bar with .043 in gauge and 55 drive links. It is a 3-chain pack with semi-chisel cutters.

A 16 in, .043 gauge chain with 55 drive links for matching Stihl saws and pole saws.
See it on AmazonThis chain is identified as R55 and is compatible with Stihl MS170, MS171, and MS180C models. Its stated pole saw compatibility includes HT70, HT73, HT75, HT100, HT101, HT130, HT131, and HT250.
This is the wrong choice for a bar that requires .050 in gauge or 56 drive links. Match every measurement before fitting it.
Which chain helps with a 16 in .050 gauge bar?
The KAKEI 16 Inch Chainsaw Chain 3/8" LP suits a 16 in guide bar with .050 in gauge and 56 drive links. It is a 3-chain pack with semi-chisel cutters.

A 16 in, .050 gauge chain with 56 drive links for matching Craftsman, Poulan, Ryobi, Echo, and Greenworks saws.
See it on AmazonThis chain is identified as S56. Its compatible devices include Craftsman chainsaws, Poulan chainsaws, Ryobi chainsaws, Echo chainsaws, and Greenworks chainsaws.
Do not substitute it for the .043 gauge, 55-drive-link chain simply because both chains are 16 in long. The gauge and drive link count still need to match the bar.
Readers comparing brand-specific options can also see Best Replacement Chains for Ryobi Chainsaws and Best Replacement Chains for Bauer Chainsaws.
How tight should a chainsaw chain be?
The chain should sit fully in the guide bar groove while still moving around the bar by hand with moderate resistance. Use the tension method in your chainsaw manual because adjustment designs differ.
A loose chain can sag from the bottom of the bar or pull away from the guide bar. A chain that is too tight may not move smoothly and can place extra strain on the saw.
After adjusting the tension, tighten the guide bar nuts as directed. Lift the bar tip as you tighten if the manual calls for that step, then check the chain again.
Never adjust a running chainsaw. Remove the battery or disconnect the power source before placing your hands near the chain.
What should you check after installing the chain?
Confirm the cutter direction, drive link seating, tension, lubrication, and brake operation. The chain should move smoothly by hand and remain inside the guide bar groove.
Look along the full top and bottom runs for a reversed cutter or a drive link sitting outside the groove. Check that the chain oil system and reservoir follow the saw's instructions before cutting.
Run the saw only in the way described by the owner's manual. Keep the bar clear of people, pets, and objects, and use the protective equipment required for chainsaw work.
The U.S. Consumer Product Safety Commission's chainsaw safety guidance covers basic precautions for operating and maintaining a chainsaw.
What is the correct chainsaw chain direction?
For the correct chainsaw chain direction, put the cutting teeth forward toward the guide bar tip on the top run. Then match the chain's length, pitch, gauge, and drive link count to the bar before tightening and checking the saw.
Pick the 18 in KAKEI chain only when your bar requires .050 in gauge and 62 drive links. Pick the .043 gauge 16 in chain for a matching 55-drive-link setup, or the .050 gauge 16 in chain for a matching 56-drive-link setup.
When in doubt, stop at the measurements. Correct orientation matters, but a correctly oriented chain with the wrong gauge or drive link count is still the wrong chain.
Frequently asked questions
Which way do the cutters face on a chainsaw chain?
The cutters face forward along the top of the guide bar, toward the bar tip. Their sharp cutting edges should point away from the chainsaw body on the top run.
On the underside, the teeth return toward the saw body as the chain travels around the bar.
Can a chainsaw chain be installed backward?
Yes, a chain can fit around the guide bar while its cutters face backward. It may move when the saw runs, but it won't cut correctly.
Turn off the saw, remove the battery or disconnect the spark plug as applicable, engage the chain brake, and reinstall it with the top cutters pointing toward the bar tip.
How do I know which chainsaw chain fits my saw?
Match the guide bar's length, pitch, gauge, and drive link count. Check the owner's manual or the markings on the guide bar.
A chain that matches only the bar length can still be wrong if its pitch, gauge, or drive link number differs.
Which way does a chainsaw chain go on a pole saw?
A pole saw uses the same basic orientation: the cutters point toward the tip on the top of the guide bar. Confirm the pole saw's required length, pitch, gauge, and drive link count before installing a replacement chain, then follow its manual for tension and safety checks.
About this guide: Our look at chainsaw chain direction draws on maker specs, materials and what owners report. See how we research.



