Guide

How to Store a Riding Lawn Mower

Updated on · By the Yard Volt Lab team

Store a riding lawn mower in a dry, sheltered space with enough room to enter, turn, and exit safely. Clean grass from the deck, follow the manual for fuel and battery care, and use a cover only when the mower is dry.

On this page (7 sections)
  1. Where should you store a riding lawn mower?
  2. How do you prepare a riding mower for storage?
  3. Is a shed large enough for a riding lawn mower?
  4. Can you store a riding mower outside with a cover?
  5. How should you store an electric riding mower?
  6. What should you do during long-term storage?
  7. What is the simplest riding lawn mower storage plan?

Store a riding lawn mower in a dry, sheltered place with enough clearance to maneuver it safely. Clean grass from the deck, follow the manual for fuel and battery care, and cover the mower only after it has cooled and dried.

A garage, barn, or properly sized shed can keep rain, sun, and falling debris off the machine. Before choosing a spot, measure the mower and its route through the doorway, then check the maker's instructions for long-term storage.

Where should you store a riding lawn mower?

A level, dry, sheltered area is a practical place to store a riding mower. Choose a location with a firm floor, safe access, and space around the machine for inspection and maintenance.

Keep the mower away from water that could pool or run under it. Avoid parking beside a furnace, open flame, or other ignition source, especially if the mower uses gasoline.

Follow the manual's ventilation and fuel-storage guidance.

A shed may work when it fits the mower and has a door wide and tall enough for entry. Our guide to best garden lawn mower storage covers storage options for different yard setups.

How much clearance does a riding mower need?

Measure the mower's length, width, and height, including its cutting deck and any attachments. Then measure the shed's interior and its door opening, and leave room to steer without scraping the walls.

Allow enough space to reach the seat, controls, tires, and deck. If you need to move the mower around other equipment, leave a clear route rather than relying on tight turns.

Consider the approach as well as the storage area. Check for slopes, narrow gates, steps, soft ground, and overhead branches that could make moving the mower difficult.

How do you prepare a riding mower for storage?

Prepare the mower by cleaning it, checking for damage, and following the owner's manual for fuel and battery care. The correct steps depend on the model and how long it will sit unused.

Park on a level surface, set the parking brake, remove the key, and let hot parts cool. If you need to work near the deck, follow the manual's steps for shutting down and preventing accidental starting.

Brush or wash away grass and dirt as the manual allows, then dry the mower before covering or storing it. Wet clippings left on the deck can hold moisture against metal parts.

Should you drain the fuel before storage?

Use the fuel procedure in your mower's manual. Some makers direct owners to stabilize fuel, while others specify draining it or running the engine dry for seasonal storage.

Don't guess or combine procedures. Work outdoors or in a well-ventilated area, keep fuel away from sparks and flames, and use an approved container if the manual calls for draining.

If the mower has a fuel shutoff valve, use it only as directed. For a battery-powered riding mower, follow its instructions for charging, disconnecting, or removing the battery.

What should you check before parking it?

Look over the tires, belts, blades, and visible wiring for damage or wear. Note any issue that needs repair before the next mowing season, and schedule service if the manual or maker recommends it.

Check the owner's manual for storage steps tied to your mower's engine, battery, and attachments. Keep the manual accessible, and store removed parts where you can find them.

A trailer can help move a riding mower to storage or another location. Review best trailers for riding lawn mower for factors such as deck width and loading access.

Is a shed large enough for a riding lawn mower?

A shed is large enough only if the mower fits through its doorway and has room inside for safe access. Compare the mower's measurements with the shed's clear interior dimensions, not just its advertised capacity.

The Keter Manor 4x6 Resin Outdoor Storage Shed has an exterior size of 51.2 x 75.6 x 78 in and an interior size of 43.7 x 69.7 x 74.8 in. Its listed door opening is 51.2 in wide and 78 in high, so compare those measurements with your mower before choosing it.

A riding mower can be wider or longer than a push mower, so don't assume it will fit because a shed is marketed for lawn equipment. Include the turning path and any room needed to open the seat or service the mower.

The KINYING Larger Outdoor Storage Shed Weather Resistance measures 53.2 in wide, 34.3 in deep, and 47.1 in high on the outside. That low height and shallow interior make it a better fit for smaller equipment or accessories than for a full-size riding mower.

Use a tape measure to check both the machine and the entrance. If the mower has a bagger, snow blade, or other attachment, measure it in the configuration you plan to store.

Can you store a riding mower outside with a cover?

You can store a mower outdoors under a cover, but a sheltered space is usually easier to keep dry and clean. If outdoor storage is your only option, use a cover made for the mower and secure it as directed.

The Tough Cover Zero-Turn Mower Cover measures 79 x 63 x 55 in and is sized for many zero-turn mowers up to a 60 in deck. It is best suited to zero-turn mowers without rollover protection bars, so check fit and configuration before use.

Make sure the mower is cool and dry before putting on a cover. A cover can limit exposure to rain and dust, but moisture trapped underneath may take longer to evaporate.

For more on weather exposure, read can lawn mowers get wet. If you have a battery-powered model, can electric lawn mowers get wet explains why you should check the maker's guidance before exposing electrical parts to water.

How should you store an electric riding mower?

Store an electric riding mower in a dry place and follow the battery maker's temperature and charging instructions. Battery removal, charge level, and maintenance needs vary by model.

Keep the charging port and battery area dry. Don't leave a charger connected unless the mower's manual permits it, and avoid storing the battery near heat or freezing conditions if the manual warns against them.

For background on battery-powered lawn equipment, see how a cordless lawn mower works. A riding mower can use a different battery system, so its own manual takes priority.

Gas-powered riding mowers have engine oil; battery-powered models may not. Check whether cordless lawn mowers need engine oil for the distinction, then confirm the service needs of your specific mower.

What should you do during long-term storage?

For long-term storage, keep the mower clean, dry, and protected, and follow the manual's seasonal steps. Check the storage area now and then for leaks, pests, or objects blocking access.

Don't store fuel in an unapproved container or leave it near heat. If you remove the battery or attachments, label them and store them in the conditions the maker recommends.

Before mowing again, inspect the mower for nests, debris, leaks, and visible damage. Check tire pressure, fluid levels, controls, and the cutting deck according to the manual, then start it outdoors.

What is the simplest riding lawn mower storage plan?

Choose storage by measuring the mower, checking the doorway, and selecting a dry place that leaves room to maneuver. Clean the machine, follow model-specific fuel and battery instructions, and cover it only when cool and dry.

Pick a full-height shed only if its entrance and interior clear the mower with space to spare. A compact outdoor box can hold supplies, while a fitted cover can help when the mower must stay outside.

Frequently asked questions

Can I store a riding lawn mower outside?

You can store a riding mower outdoors if you use a suitable cover and follow the mower maker's storage instructions, but a dry, sheltered space offers better protection from weather. Park on a level surface, keep the cover secure, and make sure the mower is cool and dry before covering it.

Should I remove the battery before storing a riding mower?

Check the owner's manual for battery storage and charging instructions. Some batteries may need to be disconnected or stored separately, while others have a specific maintenance procedure.

Keep battery terminals away from metal objects, and use only a charger approved for that battery.

How much space does a riding mower need in storage?

Measure the mower at its widest and longest points, including any attachments, then add room for the door, steering, and safe access around it. A shed's interior dimensions matter more than its exterior size.

Also check door height and width before moving the mower inside.

Should I cover a riding lawn mower in a shed?

A cover can help limit dust and debris, but cover only a clean, dry mower. Trapped moisture can linger under fabric, so allow the mower to cool and dry first.

Use a cover sized for the mower and keep vents, controls, and exhaust areas unobstructed as the manual directs.